Take full control of Nissan diesel engine performance with this advanced ECU tuning course, focused on the Continental SID series ECUs (SID301, SID309, SID310). This training is designed for professionals aiming to remap Nissan Qashqai, X-Trail, Navara, and other diesel models equipped with SID ECUs, using WinOLS with precision.

We go beyond trial-and-error and show you how to remap with engineering logic, scientific formulas, and advanced map detection.

1. Overview of Continental SID ECUs in Nissan Diesel Vehicles

The Continental SID ECU family is used in modern diesel engines for its advanced control over:

Injection Phases (Pilot, Main, Post)
Torque calculation & referencing
Boost and air mass control
EGR and DPF integration
NOx strategies and emission compliance

Models such as SID301, SID309, and SID310 are widely used in Nissan and Renault diesel platforms. These ECUs require accurate reverse engineering, correct checksum handling, and a clear understanding of torque path logic.

2. Using WinOLS to Remap Continental SID ECU Files

This course teaches how to:

Safely open and manage SID ECU files (.bin/.ori) in WinOLS
Handle checksum corrections using the right plugins or external tools
Recognize typical SID map layout for torque, boost, injection, and air mass control
Work with 2D, 3D, and HEX views to refine map structure and apply safe edits

We explain how to interpret unusual axis formats (like Load vs. Relative Air Mass), common in SID ECUs, and how to scale them properly for Nissan.

Bonus: Get the SID ECU Map Pack + Learn Manual Map Detection

Included with the course is a full Nissan SID map pack, featuring all essential maps with WinOLS-verified locations. You’ll also learn:

Manual map finding techniques using pattern recognition
Axis verification and data structure validation
Understanding SID’s torque chain (from pedal request to IQ)
How to structure a complete calibration project for remap

✅ Torque Request
✅ Torque Limiter
✅ Smoke Limiter
✅ Boost Target
✅ Injection Quantity
✅ Rail Pressure
✅ SOI (Start of Injection)
✅ DPF & EGR maps

3. Map Strategy – Understanding How SID ECUs Manage Diesel Dynamics

SID ECUs follow a structured logic:

Pedal Input → Driver Torque Request
→ Torque Limiter → Air Mass Reference → IQ Limiter (Smoke/Lambda)
→ Injection Duration → SOI → Rail Pressure & Boost Control

In this course, you’ll learn how to modify each segment safely and systematically, ensuring compatibility with emission systems while delivering performance or economy goals.

4. Safe Tuning – Maximize Power Without Breaking Hardware

Learn how to remap for results without risking EGT, DPF failure, or limp mode:

Setting proper boost and AFR targets
Calculating injection duration based on torque demand
Understanding DPF regeneration cycles
Disabling/adjusting EGR, Lambda control, or NOx sensors where legally permitted

We show sample results like:

Up to +30% torque increase
Up to +25 hp
Improved throttle response
Cleaner combustion, lower soot output

5. Scientific Diesel Remapping: Formulas & Logic-Based Adjustments

Move beyond "try and see" tuning. This course includes real-world formulas for:

Air Mass per Stroke estimation

Torque to IQ conversion

Boost target vs air requirement

Injection energy equations

AFR & smoke limiter balance

These are critical for professional diesel tuning on modern platforms like SID.

🚀 Who Should Take This Course?

✅ Ideal for:

Diesel calibration engineers
Nissan tuning specialists
ECU remap professionals
WinOLS learners seeking advanced applications
Anyone remapping SID ECUs on Nissan/Renault platforms

Includes full video training, SID-specific map pack, formula guide, and tuning support access.

FAQs:

1. Which Nissan models use Continental SID ECUs?

Models like the Qashqai, Navara, and X-Trail often use SID301, SID309, or SID310 ECUs, common in Nissan and Renault diesel engines.

2. Is WinOLS compatible with SID ECUs?

Yes. WinOLS is ideal for working with SID ECUs, offering full control over map detection, editing, and checksum management.

3. What maps are included in the SID ECU remapping course?

The course includes boost, injection, torque limiter, SOI, rail pressure, smoke limiter, and full EGR/DPF map coverage.