WinOLS DTC Removal/Fault Code Delete Course for Gasoline ECUs

course Title:

WinOLS DTC Removal/Fault Code Delete Course for Gasoline ECUs

Description:

Professional DTC removal/DTC off Online Training course using WinOLS for gasoline ECUs. Step-by-step training with lifetime support. Start tuning today.

  • Students

    0 person

  • Episodes

    0

  • Duration

Pre-requirements:

Course price:

Buy the full course for $350 and save -Infinity% compared to the $0 per-lecture price!

Buy Individual Lecture:

You can purchase each lecture separately and add them to your cart.

What Is DTC Off?

DTC Off refers to the process of removing Diagnostic Trouble Codes (DTCs) from an ECU file. By eliminating unnecessary or unwanted fault codes, tuners can prevent the ECU from entering limp mode, stop the Check Engine Light (CEL) from triggering, and remove restrictions caused by disabled or replaced sensors. This method is particularly valuable in motorsport applications, custom-tuned vehicles, and situations where certain hardware components are intentionally bypassed.


How to Permanently Delete DTC Codes from ECU Using WinOLS Software

To delete DTCs permanently, specialized tools and software are required. The general steps involved are:

  1. Reading the ECU file using tools like KESS3, Autotuner, or KTAG.
  2. Editing the binary file within WinOLS software after gaining the necessary skills through our training.
  3. Writing the modified file back to the ECU.
  4. Verifying the deletion of DTCs using diagnostic equipment to ensure no error codes remain.

With WinOLS, you gain complete control over the ECU map and the ability to perform precise DTC deletion for a wide variety of gasoline ECUs.


Petrol DTC Removal Online Training Course by Schiller Tuning

This online course by Schiller Tuning is designed to teach you how to delete DTC codes from gasoline ECUs using WinOLS software. It comes with lifetime support, so you're never alone. If the training doesn't cover a specific ECU or fault code, simply contact our support team — we will guide you or even add new content based on your request.

The course content is structured in a clear, beginner-friendly language but backed with real engineering depth. All procedures and methods have been fully tested and verified by our expert team at Schiller Tuning. If any part of the training seems unclear or if you face any difficulties, our dedicated support team is available online to answer your questions and help you every step of the way.


WinOLS DTC Delete Training ( Gasoline ECUs) – Why WinOLS?

This is the most comprehensive DTC Off training course available online. Unlike limited platforms, WinOLS offers full flexibility in editing any area of the ECU map. That’s exactly why it’s the preferred tool for DTC removal: there are no limitations to the modifications you can make. This level of access is essential for successful and permanent error code deletion, particularly in complex ECUs used in modern gasoline vehicles.


DTC Removal/ Fault Code Delete Training Course for Gasoline ECUs

Our training course is specifically designed for gasoline engine ECUs, focusing on models such as Bosch ME7, ME17, MED17, MG1, Denso, Continental, and more. This is not a generic tuning course — it’s a targeted DTC removal training aimed at the most common and powerful ECUs in today’s automotive market. You will gain the technical skills needed to confidently remove fault codes from these units.


Learn to Delete Fault Codes From Any Petrol ECU

After completing this training, you'll have the confidence and technical ability to identify and remove DTCs from any ECU, regardless of make or model. Whether you're working with German, Japanese, or American gasoline vehicles, this course gives you the tools to do the job professionally using WinOLS. You won’t need to rely on automatic solutions — you’ll have the skills to do it yourself.


Understanding Different Software Approaches

While Swiftec may offer an easier and more automated DTC removal experience, WinOLS provides unmatched control and flexibility, especially for tuners who want full access to the ECU’s internal structure. Each software has its strengths, and professional tuners often choose the right tool based on the task at hand. Our training helps you understand why and when to use WinOLS for precise DTC deletion tasks.



Ready to Take Control? Join the Schiller Tuning DTC Off Course Today!

If you're serious about mastering ECU fault code removal and becoming a professional tuner, this course is your starting point. Backed by lifetime support, proven methods, and fully tested content, the Schiller Tuning DTC Off Training is the smartest investment you can make in your tuning career. Whether you're tuning for performance or troubleshooting issues, this course will give you the expertise to handle any gasoline ECU with confidence.

🎯 Enroll now and gain instant access to powerful training materials, hands-on examples, and expert support. Let Schiller Tuning be your guide to mastering WinOLS and fault code deletion — join our growing global community of professional tuners today.

FAQs:

DTC Off means permanently removing error codes from an ECU to prevent warning lights and limp mode.

Yes, it’s designed in simple language and comes with step-by-step guidance for all levels.

It covers gasoline ECUs like Bosch ME7, ME17, MED17, MG1, Denso, Delphi, and Continental.

No prior experience is needed. The course teaches you everything from scratch.

You can contact our support, and we’ll help you or add new content on request.

Yes, we offer lifetime support via online channels to answer all your technical questions.

About Schiller Tuning

Schiller Tuning is your ultimate resource for ECU remapping articles and training. We provide high-quality content to help you learn and master ECU remapping techniques.

Quick Links

Privacy PolicyTerms of Service

Contact

Email: [email protected]

Phone: +45 55 22 92 98

© 2025 Schiller Tuning. All rights reserved.